Oracle R12 Vision Instance 12.1.3 Cloning – step by step instructions

October 8, 2013

*General Note: The below instructions, which were successfully completed and tested are from the prospective of a person who do not have any previous knowledge about cloning, advance level Linux administration etc. If you find it too amateurish, please let us know with the comments session and corrections. We will be more than happy to amend the post.

Most probably few of the errors we received with write permissions missing to /tmp for applprod user should because of missing Rapid Clone patches.

Prerequisites

Oracle VirtualBox (We don’t support a physical system as detailing a cloning for a Linux system wouldn’t fit entirely within the discussed topic)

Minimum 4GB of memory to spare for the Virtual Machine

500GB of free hard disk space (If you don’t have additional 500GB, you can use the same source machine for cloning, by backing up the necessary folders and after removing the E-BIZ folder entirely)

Step #1

Create a folder on a partition where you have 500GB or more space and call it “ebiznew”

Copy and paste both System.vdi and ebs1211db.vdi from your other virtual machine folder, where you have a properly working Vision Instance (We are not going to clone the existing VM using the VirtualBox clone utility)

Change the uuid for both System.vdi and ebs1211db.vid

E:\ebiznew>"C:\Program Files\Oracle\VirtualBox\VBoxManage.exe" internalcommands
sethduuid System.vdi
UUID changed to: 5dbdd6e3-c8ff-431d-bdd8-edf31c3012fb

E:\ebiznew>"C:\Program Files\Oracle\VirtualBox\VBoxManage.exe" internalcommands
sethduuid ebs1211db.vdi
UUID changed to: 05068998-dc4d-46ef-8f8f-1ae07b786bfa

Now start creating a new VM using VirtualBox and attach System.vdi and ebs1211db.vdi under SATA

As we have changed the kernel to NON Xen, you should able to boot up the VM immediately

Once logged in as “root”, let us drop the existing E-BIZ/* folders for cloning purpose

As root

#cd /u01

#rm -rf *

Sit back, it will take a while for the system to delete the folders and contents

Once the folders and file are deleted create a new folder called “backup” within /u01

#mkdir backup

 

Change the hostname, IP address etc for the new VM

Make sure from your HOST box you can ping the new VM by both hostname and IP address

 

*Special note: If you have a total of 8GB(only) memory with your box, you have to change the memory allocations for both your VMs (one which already has the Vision instance configured & the new VM on which you are going to execute the cloning) to 2GB each

Boot up you VM with Vision instance configured and running (Aka source system)

Edit /etc/hosts file and add the IP address and hostname of your new VM

As root

vi /etc/hosts

192.168.0.50 ebs1213.rhome.com ebs1213

Where ebs1213 is the new hostname you have set for the new VM. Adjust it according to the name you have chosen

Save and exit the vi editor and try to ping the new VM from your source VM

ping ebs1213.rhome.com

Make sure you are getting ping replies from the new VM

 

Start dbTier and appsTier sequentially and make sure that you can access the application

Step #2

Now we are all set to “try” our first cloning process

Prior cloning we MUST prepare the source system for cloning. Hence switch user to “oracle” and switch to following folder (Adjust the path according to your environment)

cd /u01/E-BIZ/db/tech_st/11.2.0.2/appsutil/scripts/VIS_appvis

$perl adpreclone.pl dbTier

(provide the apps password when it is promoted)

The pre-clone should complete within few minutes time, and if there are no errors (in our case), we can proceed to prepare the application tier now

As user “Oracle” switch to

/u01/E-BIZ/inst/apps/VIS_appvis/admin/scripts

$perl adpreclone.pl appsTier

(provide the apps password when it is promoted)

Let the pre-clone procedure complete.

Once the pre-clone procedure has been completed, shutdown the application tier and database tier sequentially

Check for FNDLIBR processes, until the count reaches two(2)

$ps –ef | grep FNDLIBR | wc –l

Now we have to copy the database and application tier folders to our target VM. For our exercise we will create individual tar.gz files for both database and application folders

We will create a new folder with /u01 on the source system

As root

#cd /u01

#mkdir backup

#cd backup

# time tar -zcvf db.tar.gz /u01/E-BIZ/db/*

This will create a new tar ball with the name “db.tar.gz” inside /u01/backup folder

Sit back and relax, it is going to take some time

Once the tar process finishes, we will attempt to create a tar ball for the application tier

#time tar -zcvf apps.tar.gz /u01/E-BIZ/apps/apps_st/*

The entire tar processes may take more than couple of hours time (Depending upon the resources you have allocated for the source VM)

Now we will copy the tar files created to our target system using SCP

As root, from /u01/backup folder

#scp –pr db.tar.gz root@ebs1213:/u01/backup

You will be given a warning, accept the prompt. After that, you will be asked to enter the root password for your target machine, in our case “ebs1213”

If your vision instance is fresh without much data added after it was put online, the tar ball will be something less than 30GB, and the transfer should complete within 16-20 minutes time

Once the database tar ball transferred you can proceed with transferring your application tar bar

#scp –pr apps.tar.gz root@ebs1213:/u01/backup

Amount of time required will vary depending upon the resources available. Wait until the transfer completes

Now you can shutdown your source system (So that you can release the memory/processors allocated and increase them with your new VM on which we will continue with the cloning process)

Shutdown your new VM (Target system)

Make changes to your new VM with more memory, processors etc

Boot up the new VM and logon to the VM as root

Step #3

We are going to MIMIC a production instance with our new VM (Please note, do not attempt to violate Oracle’s licensing agreements, our intention is not to help you with doing something which is against Oracle’s licensing terms and Vision instance usage)

We will create two new users and add them to existing oinstall and dba groups

As root

Now switch to /u01 folder (or other mount point as you have created it)

We will create a number of folders, which will be entirely different from the Vision Instance structure

#mkdir oraprod

#cd oraprod

#mkdir PROD

#cd PROD

#mkdir db

#cd /u01

#mkdir applprod

#cd applprod

#mkdir PROD

#cd PROD

#mkdir apps

Now we will change the ownership & permissions for /u01/oraprod & /u01/applprod

As root

chown -R oraprod:dba /u01/oraprod

chmod -R 777 /u01/oraprod

chown -R oraprod:dba /u01/applprod

chmod -R 777 /u01/applprod

Now we will extract the tar balls to appropriate folders

#cd /u01/oraprod/PROD/db

#time tar –zxvf /u01/backup/db.tar.gz

Approximately the extraction process will take around 3 hours for the database tar ball and around one hour for the application tar ball

Once the database tar ball extracted, we will start extracting the application tar ball

cd /u01/applprod/PROD/apps

time tar –zxvf /u01/backup/apps.tar.gz

Now we can start the actual cloning process

Step #4 Cloning the database tier

[root@visclone u01]# su - oraprod
[oraprod@ebs1213 ~]$ cd /u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/bin
[oraprod@ebs1213 bin]$

#
[root@visclone u01]# su - oraprod
[oraprod@ebs1213 ~]$ cd /u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/bin
[oraprod@ebs1213 bin]$ perl adcfgclone.pl dbTier

                     Copyright (c) 2002 Oracle Corporation
                        Redwood Shores, California, USA

                        Oracle Applications Rapid Clone

                                 Version 12.0.0

                      adcfgclone Version 120.31.12010000.8

Enter the APPS password :

Running:
/u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/bin/../jre/bin/java -Xmx600M -cp /u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/jlib/java:/u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/jlib/xmlparserv2.jar:/u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/jlib/ojdbc5.jar oracle.apps.ad.context.CloneContext -e /u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/bin/../context/db/CTXORIG.xml -validate -pairsfile /tmp/adpairsfile_3095.lst -stage /u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone  2> /tmp/adcfgclone_3095.err; echo $? > /tmp/adcfgclone_3095.res

Log file located at /u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/bin/CloneContext_1007224741.log

Provide the values required for creation of the new Database Context file.

Target System Hostname (virtual or normal) [ebs1213] :

Target Instance is RAC (y/n) [n] :

Target System Database SID : PROD

Target System Base Directory : /u01/oraprod

Target System utl_file_dir Directory List : /usr/tmp

Number of DATA_TOP's on the Target System [1] : 1

Target System DATA_TOP Directory 1 [/u01/E-BIZ/db/apps_st/data] : /u01/oraprod/PROD/db/apps_st/data

Target System RDBMS ORACLE_HOME Directory [/u01/oraprod/db/tech_st/11.1.0] : /u01/oraprod/PROD/db/tech_st/11.2.0.2

Do you want to preserve the Display [appvis:0.0] (y/n)  : n

Target System Display [ebs1213:0.0] :

Do you want the the target system to have the same port values as the source system (y/n) [y] ? : n

Target System Port Pool [0-99] : 42

Database cloning will kick start now, and should complete without throwing errors. Some sample outputs like below

Checking the port pool 42
done: Port Pool 42 is free
Report file located at /u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/temp/portpool.lst
Complete port information available at /u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/temp/portpool.lst

Creating the new Database Context file from :
  /u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/template/adxdbctx.tmp

The new database context file has been created :
  /u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/PROD_ebs1213.xml

Log file located at /u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/bin/CloneContext_1007224741.log
Check Clone Context logfile /u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/bin/CloneContext_1007224741.log for details.

Running Rapid Clone with command:
perl /u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/bin/adclone.pl java=/u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/bin/../jre mode=apply stage=/u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone component=dbTier method=CUSTOM dbctxtg=/u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/PROD_ebs1213.xml showProgress contextValidated=true
Running:
perl /u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/bin/adclone.pl java=/u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/bin/../jre mode=apply stage=/u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone component=dbTier method=CUSTOM dbctxtg=/u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/PROD_ebs1213.xml showProgress contextValidated=true
APPS Password :

Beginning database tier Apply - Mon Oct  7 22:50:46 2013

/u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true  -Doracle.installer.oui_loc=/u01/oraprod/PROD/db/tech_st/11.2.0.2/oui -classpath /u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/jlib/xmlparserv2.jar:/u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/jlib/ojdbc5.jar:/u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/jlib/java:/u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/jlib/oui/OraInstaller.jar:/u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/jlib/oui/ewt3.jar:/u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/jlib/oui/share.jar:/u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/jlib/oui/srvm.jar:/u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone/jlib/ojmisc.jar   oracle.apps.ad.clone.ApplyDBTier -e /u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/PROD_ebs1213.xml -stage /u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/clone   -showProgress
APPS Password : Log file located at /u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/log/PROD_ebs1213/ApplyDBTier_10072250.log
  /      0% completed

Once the cloning completes without errors, the database instance will start automatically and you can proceed with cloning the application tier

Step #5 Cloning the application tier

[oraprod@visclone u01]# su - oraprod
[applprod@ebs1213 ~]$ cd /u01/oraprod/PROD/apps/apps_st/comn/clone/bin
[applprod@ebs1213 bin]$

[applprod@ebs1213 bin]$ perl adcfgclone.pl appsTier

                     Copyright (c) 2002 Oracle Corporation
                        Redwood Shores, California, USA

                        Oracle Applications Rapid Clone

                                 Version 12.0.0

                      adcfgclone Version 120.31.12010000.8

Enter the APPS password :

Running:
/u01/applprod/PROD/apps/apps_st/comn/clone/bin/../jre/bin/java -Xmx600M -cp /u01/applprod/PROD/apps/apps_st/comn/clone/jlib/java:/u01/applprod/PROD/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/u01/applprod/PROD/apps/apps_st/comn/clone/jlib/ojdbc14.jar oracle.apps.ad.context.CloneContext -e /u01/applprod/PROD/apps/apps_st/comn/clone/bin/../context/apps/CTXORIG.xml -validate -pairsfile /tmp/adpairsfile_11049.lst -stage /u01/applprod/PROD/apps/apps_st/comn/clone  2> /tmp/adcfgclone_11049.err; echo $? > /tmp/adcfgclone_11049.res

Log file located at /u01/applprod/PROD/apps/apps_st/comn/clone/bin/CloneContext_1007230323.log

Provide the values required for creation of the new APPL_TOP Context file.

Target System Hostname (virtual or normal) [ebs1213] :

Target System Database SID : PROD

Target System Database Server Node [ebs1213] :

Target System Database Domain Name [rhome.com] :

Target System Base Directory : /u01/applprod

Target System Tools ORACLE_HOME Directory [/u01/applprod/apps/tech_st/10.1.2] : /u01/applprod/PROD/apps/tech_st/10.1.2

Target System Web ORACLE_HOME Directory [/u01/applprod/apps/tech_st/10.1.3] :  /u01/applprod/PROD/apps/tech_st/10.1.3

Target System APPL_TOP Directory [/u01/applprod/apps/apps_st/appl] :  /u01/applprod/PROD/apps/apps_st/appl

Target System COMMON_TOP Directory [/u01/applprod/apps/apps_st/comn] :  /u01/applprod/PROD/apps/apps_st/comn

Target System Instance Home Directory [/u01/applprod/inst] :  /u01/applprod/PROD/inst      
Target System Root Service [enabled] :

Target System Web Entry Point Services [enabled] :

Target System Web Application Services [enabled] :

Target System Batch Processing Services [enabled] :

Target System Other Services [disabled] :

Do you want to preserve the Display [appvis:0.0] (y/n)  : n

We had an error, applprod user failing to write to /tmp folder

Target System Display [ebs1213:0.0] :
RC-50004: Error occurred in CloneContext:
AC-00005: No write permissions for creating the Context file – /tmp/temp.xml
Raised by oracle.apps.ad.context.AppsContext
Check Clone Context logfile /u01/applprod/PROD/apps/apps_st/comn/clone/bin/CloneContext_1007230323.log for details.

ERROR: Context creation not completed successfully.
For additional details review the file /tmp/adcfgclone_11049.err if present.

 

Hence I have changed the ownership & permissions for  /tmp folder

login as: root
root@ebs1213.rhome.com's password:
Last login: Mon Oct  7 16:18:34 2013 from 192.168.0.200

[root@ebs1213/]# ls -al | grep tmp
drwxrwxrwx   7 root   root     20480 Oct  7 23:06 tmp
[root@ebs1213/]# chown -R applprod:dba /tmp
[root@ebs1213/]# chmod -R 777 /tmp
[root@ebs1213/]# ls -al | grep tmp
drwxrwxrwx   7 applprod dba      20480 Oct  7 23:06 tmp
[root@ebs1213/]#

Re-run the application tier cloning as user “applprod”

Checking the port pool 42
done: Port Pool 42 is free
Report file located at /u01/applprod/PROD/inst/apps/PROD_ebs1213/admin/out/portpool.lst
Complete port information available at /u01/applprod/PROD/inst/apps/PROD_ebs1213/admin/out/portpool.lst

UTL_FILE_DIR on database tier consists of the following directories.

1. /usr/tmp
2. /usr/tmp
3. /u01/oraprod/PROD/db/tech_st/11.2.0.2/appsutil/outbound/PROD_ebs1213
4. /usr/tmp
Choose a value which will be set as APPLPTMP value on the target node [1] : 1

Creating the new APPL_TOP Context file from :
  /u01/applprod/PROD/apps/apps_st/appl/ad/12.0.0/admin/template/adxmlctx.tmp

The new APPL_TOP context file has been created :
  /u01/applprod/PROD/inst/apps/PROD_ebs1213/appl/admin/PROD_ebs1213.xml

Log file located at /u01/applprod/PROD/apps/apps_st/comn/clone/bin/CloneContext_1007233459.log
Check Clone Context logfile /u01/applprod/PROD/apps/apps_st/comn/clone/bin/CloneContext_1007233459.log for details.

Running Rapid Clone with command:
perl /u01/applprod/PROD/apps/apps_st/comn/clone/bin/adclone.pl java=/u01/applprod/PROD/apps/apps_st/comn/clone/bin/../jre mode=apply stage=/u01/applprod/PROD/apps/apps_st/comn/clone component=appsTier method=CUSTOM appctxtg=/u01/applprod/PROD/inst/apps/PROD_ebs1213/appl/admin/PROD_ebs1213.xml showProgress contextValidated=true
Running:
perl /u01/applprod/PROD/apps/apps_st/comn/clone/bin/adclone.pl java=/u01/applprod/PROD/apps/apps_st/comn/clone/bin/../jre mode=apply stage=/u01/applprod/PROD/apps/apps_st/comn/clone component=appsTier method=CUSTOM appctxtg=/u01/applprod/PROD/inst/apps/PROD_ebs1213/appl/admin/PROD_ebs1213.xml showProgress contextValidated=true
APPS Password :

Beginning application tier Apply - Mon Oct  7 23:36:52 2013

/u01/applprod/PROD/apps/apps_st/comn/clone/bin/../jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true  -Doracle.installer.oui_loc=/oui -classpath /u01/applprod/PROD/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/u01/applprod/PROD/apps/apps_st/comn/clone/jlib/ojdbc14.jar:/u01/applprod/PROD/apps/apps_st/comn/clone/jlib/java:/u01/applprod/PROD/apps/apps_st/comn/clone/jlib/oui/OraInstaller.jar:/u01/applprod/PROD/apps/apps_st/comn/clone/jlib/oui/ewt3.jar:/u01/applprod/PROD/apps/apps_st/comn/clone/jlib/oui/share.jar:/u01/applprod/PROD/apps/apps_st/comn/clone/jlib/oui/srvm.jar:/u01/applprod/PROD/apps/apps_st/comn/clone/jlib/ojmisc.jar  oracle.apps.ad.clone.ApplyAppsTier -e /u01/applprod/PROD/inst/apps/PROD_ebs1213/appl/admin/PROD_ebs1213.xml -stage /u01/applprod/PROD/apps/apps_st/comn/clone    -showProgress
APPS Password : Log file located at /u01/applprod/PROD/inst/apps/PROD_ebs1213/admin/log/ApplyAppsTier_10072336.log
  -      0% completed

  Completed Apply...
Mon Oct  7 23:43:12 2013


Do you want to startup the Application Services for PROD? (y/n) [y] : y

Starting application Services for PROD:
Running:
/u01/applprod/PROD/inst/apps/PROD_ebs1213/admin/scripts/adstrtal.sh -nopromptmsg

You are running adstrtal.sh version 120.15.12010000.3

The logfile for this session is located at /u01/applprod/PROD/inst/apps/PROD_ebs1213/logs/appl/admin/log/adstrtal.log
Executing service control script:
/u01/applprod/PROD/inst/apps/PROD_ebs1213/admin/scripts/adopmnctl.sh start
script returned:
****************************************************

You are running adopmnctl.sh version 120.6.12010000.5

Starting Oracle Process Manager (OPMN) ...
opmnctl: opmn started.

adopmnctl.sh: exiting with status 0

adopmnctl.sh: check the logfile /u01/applprod/PROD/inst/apps/PROD_ebs1213/logs/appl/admin/log/adopmnctl.txt for more information ...


.end std out.

.end err out.

****************************************************


Executing service control script:
/u01/applprod/PROD/inst/apps/PROD_ebs1213/admin/scripts/adalnctl.sh start
script returned:
****************************************************

adalnctl.sh version 120.3

Checking for FNDFS executable.
Starting listener process APPS_PROD.

adalnctl.sh: exiting with status 0


adalnctl.sh: check the logfile /u01/applprod/PROD/inst/apps/PROD_ebs1213/logs/appl/admin/log/adalnctl.txt for more information ...


.end std out.

.end err out.

****************************************************


Executing service control script:
/u01/applprod/PROD/inst/apps/PROD_ebs1213/admin/scripts/adapcctl.sh start
script returned:
****************************************************

You are running adapcctl.sh version 120.7.12010000.2

Starting OPMN managed Oracle HTTP Server (OHS) instance ...
opmnctl: opmn is already running.
opmnctl: starting opmn managed processes...

adapcctl.sh: exiting with status 0

adapcctl.sh: check the logfile /u01/applprod/PROD/inst/apps/PROD_ebs1213/logs/appl/admin/log/adapcctl.txt for more information ...


.end std out.

.end err out.

****************************************************


Executing service control script:
/u01/applprod/PROD/inst/apps/PROD_ebs1213/admin/scripts/adoacorectl.sh start
script returned:
****************************************************

You are running adoacorectl.sh version 120.13

Starting OPMN managed OACORE OC4J instance  ...

adoacorectl.sh: exiting with status 0

adoacorectl.sh: check the logfile /u01/applprod/PROD/inst/apps/PROD_ebs1213/logs/appl/admin/log/adoacorectl.txt for more information ...


.end std out.

.end err out.

****************************************************


Executing service control script:
/u01/applprod/PROD/inst/apps/PROD_ebs1213/admin/scripts/adformsctl.sh start
script returned:
****************************************************

You are running adformsctl.sh  version 120.16.12010000.3

Starting OPMN managed FORMS OC4J instance  ...
Calling txkChkFormsDeployment.pl to check whether latest FORMSAPP.EAR is deployed...
Program : /u01/applprod/PROD/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkChkFormsDeployment.pl started @ Mon Oct  7 23:44:32 2013

*** Log File = /u01/applprod/PROD/inst/apps/PROD_ebs1213/logs/appl/rgf/TXK/txkChkFormsDeployment_Mon_Oct_7_23_44_31_2013/txkChkFormsDeployment_Mon_Oct_7_23_44_31_2013.log

File "/u01/applprod/PROD/apps/tech_st/10.1.3/j2ee/forms/applications/forms/formsweb/WEB-INF/lib/frmsrv.jar" exists. Proceeding to check the size...

=============================================
*** Latest formsapp.ear has been deployed ***
=============================================


Program : /u01/applprod/PROD/apps/apps_st/appl/fnd/12.0.0/patch/115/bin/txkChkFormsDeployment.pl completed @ Mon Oct  7 23:44:32 2013

Perl script txkChkFormsDeployment.pl got executed successfully



adformsctl.sh: exiting with status 0

adformsctl.sh: check the logfile /u01/applprod/PROD/inst/apps/PROD_ebs1213/logs/appl/admin/log/adformsctl.txt for more information ...


.end std out.
*** ALL THE FOLLOWING FILES ARE REQUIRED FOR RESOLVING RUNTIME ERRORS
*** Log File = /u01/applprod/PROD/inst/apps/PROD_ebs1213/logs/appl/rgf/TXK/txkChkFormsDeployment_Mon_Oct_7_23_44_31_2013/txkChkFormsDeployment_Mon_Oct_7_23_44_31_2013.log

.end err out.

****************************************************


Executing service control script:
/u01/applprod/PROD/inst/apps/PROD_ebs1213/admin/scripts/adoafmctl.sh start
script returned:
****************************************************

You are running adoafmctl.sh version 120.8

Starting OPMN managed OAFM OC4J instance  ...

adoafmctl.sh: exiting with status 0

adoafmctl.sh: check the logfile /u01/applprod/PROD/inst/apps/PROD_ebs1213/logs/appl/admin/log/adoafmctl.txt for more information ...


.end std out.

.end err out.

****************************************************


Executing service control script:
/u01/applprod/PROD/inst/apps/PROD_ebs1213/admin/scripts/adcmctl.sh start
script returned:
****************************************************

You are running adcmctl.sh version 120.17.12010000.5

Starting concurrent manager for PROD ...
Starting PROD_1007@PROD Internal Concurrent Manager
Default printer is noprint

adcmctl.sh: exiting with status 0


adcmctl.sh: check the logfile /u01/applprod/PROD/inst/apps/PROD_ebs1213/logs/appl/admin/log/adcmctl.txt for more information ...


.end std out.

.end err out.

****************************************************


Executing service control script:
/u01/applprod/PROD/inst/apps/PROD_ebs1213/admin/scripts/jtffmctl.sh start
script returned:
****************************************************

You are running jtffmctl.sh version 120.3

Validating Fulfillment patch level via /u01/applprod/PROD/apps/apps_st/comn/java/classes
Fulfillment patch level validated.
Starting Fulfillment Server for PROD on port 9342 ...

jtffmctl.sh: exiting with status 0


.end std out.

.end err out.

****************************************************


All enabled services for this node are started.

adstrtal.sh: Exiting with status 0

adstrtal.sh: check the logfile /u01/applprod/PROD/inst/apps/PROD_ebs1213/logs/appl/admin/log/adstrtal.log for more information ...

[applprod@ebs1213 bin]$

Rolled back /tmp ownership

[root@ebs1213 /]# chown -R root:root /tmp
[root@ebs1213 /]# ls -al | grep tmp
drwxrwxrwx   7 root   root     28672 Oct  7 23:44 tmp
[root@ebs1213 /]#

Try to access your newly cloned instance through http://ebs1213.rhome.com:8042/

You should be provided with a login page. Use either sysadmin or other user you have created earlier, change site name etc and enjoy!

I hope you have enjoyed another “beginner” post form windows7bugs

for windows7bugs

rajesh


Oracle E-Business Suite R12 12.1.3, build a Vision Instance using Oracle Virtual Box

October 2, 2013

 

A year back, following the Oracle’s blog, got excited and got engaged with a tedious task to setup a Vision instance for Oracle R12 12.1.3 using the templates.

Against all the warnings and negative responses, I did manage to setup Oracle VM Manager and other repositories using Oracle Virtual Box and put the Vision instance online.

The efforts were unjustified as the tasks involved were supposed to be carried out by a seasoned DBA with advance level Linux knowledge. Apparently I lost the appetite to continue with the solution and discarded the entire setup along with the data repositories.

Recently, I came across the below article

http://www.pythian.com/blog/build-ebs-sandbox-1hr/

which explained a different approach towards setting up a Vision instance using the same Oracle templates for R12 12.1.3 and decided to give it a try.

I must say, John Piwowar @ pythian has put everything in place, so that a novice like me could follow the instructions without making any kind of mistakes and get the vision instance up and running.

Once the vision instance was up and running, I started wondering whether I could try something further. Oracle’s template based approach was involving two independent virtual machines serving two different roles

  1. One server providing the database node
  2. Second server providing the application node

At work I am used to deal with a single server hosting both database and application nodes which makes few things like server administration, OS patching etc easier.

Hence I started pondering the possibilities of merging both database and application servers into a single server.

Right now, after around 48 hours, I have successfully managed to merge both the nodes into a single server (virtual) and online with the Vision instance & I am going to share the entire procedures in detail so that you can also!

PART-1 Collect and arrange your stuff

 

Minimum Requirements

  • A desktop/laptop machine with minimum 4GB free RAM for the virtual machine. That means you must have 6-8GB base memory
  • Loads of free storage space. If your fixed disk doesn’t have minimum 500GB free disk space, I recommend you to buy a 1T external HDD (the read/write speed may be compromised, USB3 could be a minor exception)
  • Access to a very fast internet connection to download the templates from Oracle e-delivery portal

image

image

You have to download 11 files, 38GB by continuing

image

Pythian post describes a method to use wget to download all the files listed, using a file list input parameter, from a OSx/Linux host.

I downloaded the above files from a Windows machine, and must say it was a painful process.

PART-2 Convert the template files into .img and then .vdi files

I am not going to repeat the steps which are already clearly narrated with pythian article. Only suggest that, don’t use a Windows machine and 7zip to do all the unzip and joining the files. You use a Linux Virtual machine to do those jobs. It would be faster, and it would be the best. I created a Oracle Linux 6 VirtualBox to do those jobs by sharing the downloads folder with the Virtual Machine.

convert img-vdi

PART-3 Backup everything!

So once the img files are converted as .VDI files, the most import thing is to backup the .VDI files to somewhere else! Yes, you may corrupt the sources available inside the .VDI files while attempting to setup the Vision instance. If you don’t have a backup, you have to go through the painful process of unzipping, combining and converting the .img files to .VDI formats. Trust me, this exercise could easily run into 4-6 hours time, depending upon the efficiency of your hardware.

PART-4 1st Gear, slow start

Create a folder called “myvision” (name it anything)

Copy both System.vdi and ebs1211db.vdi (While converting the .img files I gave the .VDI files the same image names) from your database template folder or backup folder to “myvision” folder

The actual size of ebs1211db.vdi over Windows environment will be approximately 220GB, which will be few GB smaller over Linux environment.

As we are planning to host both the dB and Application tier from a single server, we MUST increase the size of ebs1211db.vdi

Let me explain why, prior going ahead

Oracle’s approach towards the VM setup was purely involving two servers(virtual) and both database & application files are placed on /u01 mount point

ie, Database server has a mount point called /u01 and so does the application server

All the clone scripts available for both database & applications servers have certain scripts hardcoded with /u01 as base path. Hence, one could get into useless activities of editing scripts to change the hardcoded base path values to adjust the cloning (Which was done successfully)

PART-5 2nd Gear, Resize ebs1211db.vdi

Fortunately, ebs1211db.vdi doesn’t have multiple partitions. Hence resizing the volume is pretty easier using Virtual Box command line tools & free linux tools like Gparted

Switch to command prompt (if you are on Windows 7 & 8 make it elevated)

Switch to “myvision” folder

C:\Users\rthampi>cd D:\myvision

Issue the following command

D:\myvision>”C:\Program Files\Oracle\VirtualBox\VBoxManage.exe” modifyhd ebs1211db.vdi –resize 460800

With the above command, the ebs1211db.vdi size will be modified as 450GB! and this is done in a fraction of moment

Refer below link for more details like how to use Gparted for resizing a .VDI file which is used with a Linux host

http://derekmolloy.ie/resize-a-virtualbox-disk/

PART-6 3rd Gear, We are on the go

Release ebs1211db.vdi from the Gparted Virtual Machine. Let us start creating a Virtual Machine using Oracle’s VirtualBox. Please note we are using the latest version of VirtualBox, if you are not, please update prior you move ahead with rest of the exercises

Please check the VM configurations I made for my Vision Instance Server with the below image

image

You can see that I have attached both System.vdi & ebs1211db.vdi files under SATA

Now, most important: You must have a .iso image or a physical DVD/CD for a recent release of Oracle/CentOS/RHEL linux, as we have to alter few attributes of the Virtual Machine we are going to put online.

Oracle has created the VM compiling a XEN kernel, which will not work under VirtualBox & you will fail to boot your Vision Instance VM, unless the kernel pointers are changed and recompiled.

Don’t worry it is pretty easy

Follow pythian article until the new kernel installation part

If you have just downloaded the templates from Oracle, you have the latest release of Oracle Linux embedded with System.img/.vdi file, and you don’t have to install a new kernel.

As root

#rpm –qa | grep kernel

image

If your uek kernel version matches as one provided with the image or higher, you can safely move ahead with creating a new initrd entry. As root issue the following command

#mkinitrd -v -f /boot/initrd-2.6.32-100.26.2.el5.img 2.6.32-100.26.2.el5

Reboot your Virtual Machine, after removing the Linux media from the CD rom drive (or detach the linux iso image)

If you were following pythian post attentively, your new virtual machine MUST boot, without throwing any errors and prompt you for a login

The default password for root is “ovsroot”

I hope you did change the /etc/fstab entry for “/u01” mounting point prior rebooting the server as mentioned last time and that you have changed the

/etc/sysconfig/oraclevm-template entry to RUN_TEMPLATE_CONF=YES

If you haven’t, please do & restart the Virtual Machine. Optionally you can set a static IP to your box, so that you can start using a ssh client like putty, which will genuinely make many things easier while setting up the server at later stages.

Once the server restarted, you will notice that Oracle will automatically start the cloning process based on the “RUN_TEMPLATE_CONF=YES” entry

Throughout, we were using a hostname “appvis”, hence all the instructions, workarounds will utilize the same hostname. Please adjust the hostname according your preferences

Configuring Oracle E-Business Suite…

Configuring network interface.
  Network device: eth0
  Hardware address: 08:00:27:18:A4:CE

Enter static IP address: 192.168.0.30
Enter netmask: [255.255.255.0]
Enter gateway: 192.168.0.1
Enter DNS server: 192.168.0.1

Shutting down interface eth0:                              [  OK  ]
Shutting down loopback interface:                          [  OK  ]

Configuring network settings.
  IP configuration: Static IP address

Bringing up loopback interface:                            [  OK  ]
Bringing up interface eth0:                                [  OK  ]

Enter hostname (e.g, host.domain.com): appvis.rhome.com

Network configuration changed successfully.
  IP configuration: Static IP address
  IP address:       192.168.0.30
  Netmask:          255.255.255.0
  Gateway:          192.168.0.1
  DNS server:       192.168.0.1
  Hostname:         appvis.rhome.com

 

Database node related prompts

Enter the APPS password : apps

Provide the values required for creation of the new Database Context file.

Target System Hostname (virtual or normal) [appvis] :<<press ENTER>>

Target Instance is RAC (y/n) [n] : n<<press ENTER>>

Target System Database SID : VIS

Target System Base Directory : /u01/E-BIZ

Target System utl_file_dir Directory List : /usr/tmp

Number of DATA_TOP’s on the Target System [1] :<<press ENTER>>

Target System DATA_TOP Directory 1 [/u01/E-BIZ/db/apps_st/data] : /u01/E-BIZ/db/apps_st/data

Target System RDBMS ORACLE_HOME Directory [/u02/E-BIZ/db/tech_st/11.1.0] : /u01/E-BIZ/db/tech_st/11.2.0.2

Do you want to preserve the Display [atgtxk05:0.0] (y/n)  : n

Target System Display [appvis:0.0] :<<press ENTER>>

Do you want the the target system to have the same port values as the source system (y/n) [y] ? : n

Target System Port Pool [0-99] : 42

Make a note of the System Port Pool you have entered here, as we must use the same while setting up the Application tier, in order to establish a connection to the database & perform the cloning process

Sit back and let the cloning process for database to complete. It may take a while. Once the cloning process is over, the database will be started.

After a successful completion of cloning, the server will come back to a logon prompt

login as “oracle” and the default password is “oracle”

You will be asked to change the password for user oracle and APPS, ignore the prompts this time.

PART-7 4thd Gear, Free on the roads, hacking the Application tier

As I mentioned, what we are going to do is a pure hack, against Oracle’s design structure.

The first step is to create a soft link, which is mandatory for cloning the Application tier

Login as root
cd /usr/lib
cp libXtst.so.6  libXtst.so.6.backup
rm libXtst.so.6
ln -s /usr/X11R6/lib/libXtst.so.6.1 /usr/lib/libXtst.so.6

Refer the following link for more details

http://11iapps.wordpress.com/tag/usrliblibxtst-so-6-undefined-reference-to-__stack_chk_failglibc_2-4-usrliblibxtst-so-6-undefined-reference-to-__fprintf_chkglibc_2-3-4-usrliblibxtst-so-6-undefined-reference-to-__sp/

Shutdown the database

#cd /u01/

#./stopdb.sh

Shutdown the Virtual Machine

#init 0

Copy the ebs1211apps.vdi to “myvision” folder now

Change the settings for your new virtual machine and attach ebs1211apps.vdi under SATA

Start the server

As your server starts you will notice that the database server getting started during the boot process itself. I’ll explain the methods to disable the automatic startup later with this post

Once the logon prompt appears, login as root (password: ovsroot)

Let us mount the newly added ebs1211apps.vdi (/dev/sdc1) to a mount point

As root

#mkdir /u02

#mount –t ext3 /dev/sdc1 /u02

The real hacks will take place now

Copy the /u02/E-BIZ/apps folder to /u01/E-BIZ/

As root

#cp –avr /u02/E-BIZ/* /u01/BIZ/

(I slept a whole night after starting the copying process, hence hardly have any idea how long it took, however I am sure you can finish one English movie during the copying period)

A total of 29GB will be copied to /u01/BIZ/apps folder

Once the copy process is over, we are ready to try the Application tier clone.

As root, issue the following command

#perl /u01/E-BIZ/apps/apps_st/comn/clone/bin/adcfgclone.pl appsTier

As prompted with the Database tier clone, a number of prompts you must answer, commonly the following

Enter the APPS password : apps
Target System Hostname (virtual or normal) [appvis] : <ENTER to take default>
Target System Database SID : VIS
Target System Database Server Node [appvis] : gkar
Target System Database Domain Name [rhome.com] : <ENTER to take default>
Target System Base Directory : /u01/E-BIZ
Target System Tools ORACLE_HOME Directory [/u01/E-BIZ/apps/tech_st/10.1.2] : <ENTER to take default>
Target System Web ORACLE_HOME Directory [/u01/E-BIZ/apps/tech_st/10.1.3] : <ENTER to take default>
Target System APPL_TOP Directory [/u01/E-BIZ/apps/apps_st/appl] : <ENTER to take default>
Target System COMMON_TOP Directory [/u01/E-BIZ/apps/apps_st/comn] : <ENTER to take default>
Target System Instance Home Directory [/u01/E-BIZ/inst] : <ENTER to take default>
Target System Root Service [enabled] : <ENTER to take default>
Target System Web Entry Point Services [enabled] : <ENTER to take default>
Target System Web Application Services [enabled] : <ENTER to take default>
Target System Batch Processing Services [enabled] : <ENTER to take default>
Target System Other Services [disabled] : <ENTER to take default>
Do you want to preserve the Display [atgtxk-09:0.0] (y/n) : n
Target System Display [appvis:0.0] : <ENTER to take default>
Do you want the the target system to have the same port values as the source system (y/n) [y] ? : n
Target System Port Pool [0-99] : 42
UTL_FILE_DIR on database tier consists of the following directories.
1. /usr/tmp
2. /usr/tmp
3. /u01/E-BIZ/db/tech_st/11.2.0.2/appsutil/outbound/VIS_appvis
4. /usr/tmp
Choose 1, default

The cloning will kick start now, and resume until 89% prior ending up with a FATAL error

–Minor update (if it is already NOT too late) 08-October-2013

I was trying to do a cloning & realized that the cloning process terminates with various errors and most of the errors were due to write permissions.

I was able to complete the cloning processes (dbTier & appsTier) individually by changing the permissions on folders like

Prior cloning the database tier

As root

chown –R oracle:dba /u01/E-BIZ/db
chmod –R 777 /u01/E-BIZ/db

As user “oracle”

perl adcfgclone.pl dbTier

and prior cloning the apps tier

As root

chown –R oracle:dba /u01/E-BIZ/apps
chmod –R 777 /u01/E-BIZ/apps
chown –R oracle:dba /tmp
chmod –R 777 /tmp

As user “oracle”

perl adcfgclone.pl appsTier

and after the clone, resetting the ownership of /tmp back to root

chown –R root:root /tmp
chmod –R 777 /tmp

Hence the below mentioned error “could be” addressed by changing few OS level rights as mentioned above.

This error is caused by missing “adautocfg.sh” file in the folder /u01/E-BIZ/inst/apps/VIS_appvis/admin/scripts which the auto configuration tries to access.

Without this file in this particular directory, the cloning process will never complete successfully. So we have to find a solution for it (I am not a APPS DBA and genuinely do not have any idea why the heck this file is missing in this particular location. All I could do is a guess work and it is towards avoiding the oracle template configuration wizard part, which initiates few functions. I’ll check it one of the following days and update this post accordingly)

 

As root

#cd /u01/E-BIZ/inst/apps/VIS_appvis/admin/scripts
#touch adautocfg.sh

#vi adautocfg.sh

and paste the following (Yes you can do it, just change the VIS_appvis with your CONTEXT name)

#!/bin/sh
# dbdrv: none

#
# $Header: adautocfg_ux.sh 120.4 2008/02/19 04:28:02 sbandla ship $
#
# ###############################################################
#
# This file is automatically generated by AutoConfig.  It will be read and
# overwritten.  If you were instructed to edit this file, or if you are not
# able to use the settings created by AutoConfig, refer to Metalink Note
# 387859.1 for assistance.
#
# ###############################################################

#

CTX_FILE=”/u01/E-BIZ/inst/apps/VIS_appvis/appl/admin/VIS_appvis.xml
promptmsg=””
myparams=””
appspass=””

for myarg in $*
do

  arg=`echo $myarg | sed ‘s/^-//’`
  case $arg in
    appspass=*)
            appspass=`echo $arg | sed ‘s/appspass=//g’`
            shift
            ;;
    nocustom)
            myparams=”$myparams $arg”
            shift
            ;;
    noversionchecks)
            myparams=”$myparams $arg”
            shift
            ;;
    promptmsg=*)
            promptmsg=`echo $arg | sed ‘s/promptmsg=//g’`
            shift
            ;;
        *)  echo “$0: unrecognized action specified”
            exit 1
  esac
done

if test “${appspass}x” = “x”; then
  if test “${promptmsg}” != “hide”; then
    stty -echo
    printf “Enter the APPS user password:”
    read appspass
    printf “\n”
    stty echo
  else
    read appspass
  fi
fi

myparams=”$myparams promptmsg=hide”

{ echo $appspass; } | /u01/E-BIZ/apps/apps_st/appl/ad/12.0.0/bin/adconfig.sh -co         ntextfile=$CTX_FILE $myparams

error_code=$?
exit $error_code

 

Save the file and exit.

Let us try to re-initiate the application tier cloning process once again

As root

#perl /u01/E-BIZ/apps/apps_st/comn/clone/bin/adcfgclone.pl appsTier

The cloning process must complete without throwing any further errors and you will be asked whether the application should be started by the end of the cloning process. You can go ahead with starting the application tier.

However, you will notice, the apache HTTP will fail to start, as the CONTEXT FILE will have entries, which were not properly put in place during our last clone process as it has ended up with a FATAL error.

Let us edit the CONTEXT file and correct those entries now.

(This situation arises only if the cloning is done as user root)

 

As root

#vi /u01/E-BIZ/inst/apps/VIS_appvis/appl/admin/VIS_appvis.xml

Search for the string

/s_appsuser

replace s_appsuser values “root” with “oracle” and s_appsgroup with “oinstall”

Save the file and exit vi editor

 

Shutdown the application tier:

/u01/E-BIZ/inst/apps/VIS_appvis/admin/scripts/adstpall.sh apps/apps

Shutdown the database tier:

/u01/E-BIZ/db/tech_st/11.2.0.2/appsutil/scripts/VIS_appvis/addlnctl stop VIS

/u01/E-BIZ/db/tech_st/11.2.0.2/appsutil/scripts/VIS_appvis/addbctl.sh stop immediate

Once the database server shutdown

As root

#chown -R oracle:oinstall /u01
#chmod –R 775 /u01

Restart database

/u01/E-BIZ/db/tech_st/11.2.0.2/appsutil/scripts/VIS_appvis/addlnctl start VIS

/u01/E-BIZ/db/tech_st/11.2.0.2/appsutil/scripts/VIS_appvis/addbctl start

Now, proceed with auto configure so that the new changes will take place with changed user & group settings with the CONTEXT FILE

/u01/E-BIZ/inst/apps/VIS_appvis/admin/scripts/adautocfg.sh

Provide  the apps password and sit back. It hardly takes few minutes to reset everything. Once the auto configuration part completes, go ahead with starting the application node

Now you can access the application through http://appvis.rhome.com:8042/

Incase if you are not sure about the http port, open up “VIS_appvis.xml” CONTEXT FILE and scan through, you will find it with url address area

Use sysadmin/sysadmin to logon and enjoy!!!

PART-8 5th Gear, Smooth Sailing, Restarting and online

As a system administrator I literally don’t like the idea of starting resource hungry services until the boxes are completed booted up and online. I prefer to start certain services myself and make sure that whatever were started manually completed the startup process successfully.

As root switch to “/etc/init.d” folder

chmod –x ebizdb

and you are done! The database will not startup next time while you are starting your Vision instance.

Go to these folders for starting database and application nodes

Database
/u01/E-BIZ/db/tech_st/11.2.0.2/appsutil/scripts/VIS_appvis
Application
/u01/E-BIZ/inst/apps/VIS_appvis/admin/scripts

 

Day 3 – Adding Desktop to Oracle’s basic server (system.vdi)

I personally prefer to have a proper GUI, coming from an entirely Windows environment, that is a MUST for many times, regardless whether I am working with Linux or Windows systems

Here are the few things I have done to get the GNOME desktop installed with the basic Oracle linux Server embedded with the Oracle VM templates for Oracle R12 12.1.3

 

(Please make sure, from your Oracle linux box you have access to internet. Do you a ping www.google.com and confirm you are getting replies)

(Please shutdown both database and application prior proceeding)

(Please increase the size of System.vdi file PRIOR experimenting with any of the below exercises, and be careful while you would use Gparted to do it. Make a backup for system.vdi file and follow the thread provided above with the post to resize the partition (it is easy, I assure))

 

As root

#cd /etc/yum.repos.d
#wget http://public-yum.oracle.com/public-yum-el5.repo

This will install the public yum repository from Oracle

#yum update

It may take a while to download and upgrade the entire system and your Linux release will be upgrade to 5.9 (Tikanga)

#cat /etc/redhat-release

Now reboot your box, login as root once again

#yum grouplist
#yum groupinstall “X Window System” “GNOME Desktop Environment”

Around 380MB data will be downloaded and GNOME Desktop will be installed. Sit back and relax

Try to start the Desktop now

As root

#startx

X will crash and you will be provided certain error messages, which are NOT what we want. Hence let us go ahead and “correct” X

#X –config xorg.conf.new

X will start, however, a blank screen with ‘X’ shaped cursor and Ctrl+Alt+Backspace doesn’t kill it (minimum in my case)

Reset the terminal from VirtualBox menu and logon to the box as root once again

#cd /etc/X11

#mv xorg.conf xorg.conf.backup

#startx

Am sure you will be very much pleased to the GUI starting up. However, you don’t have a browser yet, so

#yum install firefox

This will install Firefox 17 (latest from the Oracle public yum repository)

If you want to start the GNOME automatic during the box startup, you need to edit /etc/inittab file

#vi /etc/inittab

and change the line

“id:3:initdefault:”

with

“id:5:initdefault:”

Save the file and exit the editor

Now a final reboot

#init 6

Once the box rebooted, you will be provided a graphical interface for the login process. Login and enjoy your GUI

However, if you would try to install the VirtualBox guest addons you will end up with FATAL errors, reporting missing headers. So you should, as root install the missing header files

#yum install kernel-uek-devel

A 6mb download will install the missing headers and, now you can safely complete the VirtualBox guest addons

regards

for windows7bugs

rajesh


Oracle E-Business Suite R12 Internet explorer 10 “unidentified”

September 29, 2013

 

Just 24 hours back, I made another attempt to setup a vision instance at home using VM templates from Oracle and, guys, it was a total success *grin* (Will post the installation steps later, stay tuned, it is loads of fun!)

However I was stuck with an issue, the html/jsp pages will not render properly in Internet Explorer 10 (I am using Windows 8 Pro 64bit) and started with my favorite search toy “google” once again

image

 

image

I came across a blog post from Oracle discussing about the certification path here

and within the thread there was another reference towards a later blog entry, which explained the certification details(here). Unless you are in a hurry, you shouldn’t miss the minimized quote says

Compatibility Mode for IE 10 + EBS 12

To prevent issues with certain OA Framework pages, you should run IE 10 in “Compatibility Mode.” See the “Known Issues” section in Note 389422.1 for more details.

 

image

How to? have a look at the below images

image

That’s all Smile

image

hope the post was useful for minimum few out there

 

regards,

admin


Oracle E-Business suite custom application development-How to submit a concurrent request from a FORM module through push button click

November 23, 2012

 

Required: FNDCONC.pll attached to custom form

with when-button-pressed trigger, attach the following code (Please remove what is not applicable in your case)

Declare
  l_ord_num               NUMBER := 0;
   l_ord_type_name         VARCHAR2 (240);
   l_req_id_Rep            NUMBER;
   l_request_completed     BOOLEAN := FALSE;
   l_req_phase             VARCHAR2 (20);
   l_req_status            VARCHAR2 (1000);
   l_req_dev_phase         VARCHAR2 (1000);
   l_req_dev_status        VARCHAR2 (1000);
   l_req_message           VARCHAR2 (1000);
   l_conc_mgr_status       NUMBER;
   p_call_stat             NUMBER;
   p_activep_stat          NUMBER;

   l_order_category_code   NUMBER;
   l_inv_report_name       VARCHAR2 (40);
   l_ret_report_name       VARCHAR2 (40);
   l_req_id                                 NUMBER;
   l_order_type_name                VARCHAR2(30);
Begin
  l_req_id :=
      fnd_request.submit_request (‘ONT’,—Actual application short name
                                  l_inv_report_name,—Short name of concurrent program, please note this is not the executable name
                                  NULL,—Description not required
                                  SYSDATE,—start time, not required
                                  FALSE,—subsequent report name, not required

/*You can pass a total of 100 parameters, just make sure to pass them in the same order you have defined them in the parameter session for the concurrent program*/
                                  :ORDERS.OE_ORDER_NUMBER,                                   l_order_type_name,                                   NULL,
                                  NULL,
                                  apps.fnd_profile.VALUE (‘ORG_ID’));

:SYSTEM.Message_Level := ’25’;
   COMMIT;

   l_request_completed :=
      fnd_concurrent.wait_for_request (request_id   => l_req_id,
                                       INTERVAL     => 1,
                                       phase        => l_req_phase,
                                       status       => l_req_status,
                                       dev_phase    => l_req_dev_phase,
                                       dev_status   => l_req_dev_status,
                                       MESSAGE      => l_req_message);

—   :SYSTEM.Message_Level := ’25’;
   COMMIT;

:SYSTEM.Message_Level := ‘0’;

   editor_pkg.report (l_req_id, ‘Y’);

/*for displaying the pdf automatically with a new window or tab after the concurrent request completes successfully*/
END;

This should provide you the desired functionality.

regards,

admin


Oracle VM Templates, Are you sure you want to try them?

July 13, 2012

 

I have a application DBA friend who is good, knows his stuff and agreed to setup my home desktop machine with Oracle E-Business Suite R12 12.0.4 for certain kind of researches, even though I have access to three test instances at work!

After spending almost three years developing Oracle E-Business custom applications and reports, I just finished a full functional training on module Supply Chain Management from Oracle university, and I came across “Oracle VM Templates”, great, my life was just beautiful until

To run a vision instance all you need is 4GB of spare memory, 500GB storage, VirtualBox and Oracle Enterprise linux. Almost everything here other than the hardware part is free(?) to certain extends, I should had gone for it, instead I opted Oracle VM templates

Now, I needed to download around 37Gb (I already have Oracle supplied DVDs for R12 12.0.3, both 32/64bit) of template files, which come in .zip format. I need Linux environment to join them, OH YES, Oracle documentation for the same is great, provided you are BLIND

Now to use the downloaded templates (which are bundles of application and database tier, pre-configured and expected to run over virtual machines) I need Oracle VM server and Oracle VM Manager which runs only from linux environment (heh, did I say Oracle Linux Only?)

So in total I need 2 numbers of servers, ie, I run two virtual machines using VirtualBox, 1st one is used for a bare metal installation of Oracle VM server, Second is for Oracle Enterprise Linux, on top of which I  install Oracle VM Manager)

Ah, forgot to mention, I need two NICs to balance the network load, ie, my hopes to try out the VM templates from company provided hi-end laptop has just started fading….not entirely yet, though

So the story is becoming interesting, ain’t it? We will expand the story as much possible in coming days, until then, please share our joy, we just got our first hundred thousand hits…

 

for Windows7bugs

Admin